Switching between the tractor and the cut-sheetfeeder
You can easily switch between continuous paper loaded from the
tractor and single sheets loaded from the cut-sheet feeder without
removing your continuous paper.

Switching to continuous paper

Follow the steps below to switch to continuous paper loaded from
the tractor.
1. If any single sheets are in the paper path, press the Load/Eject
button to eject them.
2. Move the paper release lever to the tractor position.
3. Make sure the sheet guide’s extension flap is closed, and push
the sheet guide extension all the way in.

Switching to single sheets

To switch back to single sheets loaded from the cut-sheet feeder,
follow these steps:
1. If any continuous paper remains in the printer, press the
Tear Off/Bin button to advance the paper to the tear-off
position.
2. Tear off the printed pages.
3. Press the Load/Eject button. The printer feeds the paper
backward to the standby position. The paper is still attached
to the tractor but is no longer in the paper path.
4. Move the paper release lever to the single-sheet position.
5. Pull out the sheet guide extension, and open the extension flap
if you are printing on long paper.
5
R
Adonis Rev.E
A5 size Chapter 5
97/04/07 pass 0
Using Printer Options 5-13