Note

If you’re using roll paper and you choose a paper size that’s larger than your image, the image will be centered in the space you selected.

Note

These settings override settings made through the control panel.

Using EPSON Drivers and Utilities for Macintosh B-9

2.From the Paper Size list, select your image size (if you’re using roll paper) or the size of your sheet. For paper size equivalents in inches, see page 5-2.If your size is not listed, click Customize. Then enter the size in hundredths of an inch (or centimeters).

3.Select the type of paper you loaded in the printer from the Paper Source list.

If your image is more than 62 inches long, select Roll Paper (Banner) (EPSON Stylus Pro 9500 only). You can also use this setting to print a series of continuous images without any “margin space” between them.

4.When you’re using roll paper, set the following options:

•Auto Rotate

Saves paper if your document length is shorter than the printable width of the paper roll. Your image will be turned automatically by 90 degrees and printed crosswise.

•Auto Cut

Choose this option if you want the paper to be cut automatically after each page is printed.

•Print Page Line

Prints trim lines on the right and bottom edges of your pages.

•Save Roll Paper

Saves paper by not feeding the blank portion of the last page of your document. Applicable in Roll Paper (Banner) mode (EPSON Stylus Pro 9500) only.

5.Make the settings you want for Orientation, Reduce or Enlarge, and

Printable Area.

6.After making your settings, click OK.