Caution
To avoid feeding excess paper through the printer, make sure you don’t select Sheet when you’re using roll paper.
Loading Roll Paper for Printing
Once the roll paper is attached to the spindle and inserted in the printer, you’re ready to load it for printing. First, open the roll paper cover and make sure the spindle is inserted correctly. Then follow these steps:
1.Make sure the printer is turned on. Then press the Paper Source button until one of the Roll lights comes on.
Paper out
SelecType
Paper Source
Roll |
|
|
Auto Cut |
| Item |
Roll |
| + |
Cutter Off |
| |
|
|
|
|
|
|
Caution
If you’re using canvas, vinyl, or heavy stock, choose Roll Cutter Off. Media that is too thick may damage the cutter.
•Choose Roll Auto Cut if you want the paper to be cut automatically after each page is printed.
•Choose Roll Cutter Off if you’re printing on canvas, vinyl, or other heavy media, if you’re using the optional auto
•If you’re using the auto cut setting, you can have a trim line printed on the right edge of your images or pages. If you’re not using auto cut, you can have the line printed on the right and bottom edges of your pages. See page
You can also select roll paper settings through your print options, which will override the control panel settings. See the RIP Station 5100 User Guide or Appendix B or C in this manual for more information.