Installing the New Cutter Blade
After you have removed the used cutter blade, you’re ready to install the new one. Follow these steps:
1.Remove the new blade from its package.
2.Make sure the spring coil is inside the cutter holder. If necessary, reinstall the coil.
3.Fully insert the new blade into the paper cutter holder in the direction shown below.
4.Push in the side pin while turning the paper cutter cover to the left to close the casing. CLOSE LOWER COVER appears on the display.
5.Close the lower cover. The cutter holder moves to the home (far right) position and READY appears on the display.