6 Introduction
Caution
Always turn the printer off using the Power button. When you press this button, the Operate light flashes briefly then goes out. Do not unplug the printer or turn off the power to the printer until the Operate light is off. This ensures that the print head is safely capped.
Before using your printer and RIP Station 5100, read the following safety instructions to make sure you use the equipment safely and effectively.
•Turn off and unplug the printer (and RIP Station 5100) before cleaning. Clean with a damp cloth only. Do not spill liquid on the printer (or RIP Station 5100).
•Do not place the printer (or RIP Station 5100) on an unstable surface or near a radiator or heating vent. Avoid areas subject to rapid changes in temperature and humidity or shock and vibrations.
•Do not place the printer near a window or in direct sunlight. Bright light can interfere with the paper sensors, causing paper jams and related problems.
•Keep the entire system away from potential sources of electromagnetic interference, such as loudspeakers or the base units of cordless telephones.
•Place the printer (and RIP Station 5100) on a flat surface. They will not operate properly if they are tilted or at an angle.
•Do not block or cover the openings in the printer case (or RIP Station 5100 case) or insert objects through the slots.
•Use only the type of power source indicated on the label.
•Connect all equipment to properly grounded power outlets. Avoid using outlets on the same circuit as photocopiers or air control systems that regularly switch on and off. Do not use outlets controlled by wall switches or timers.
•Place the printer (and RIP Station 5100) near a wall outlet where the plugs can be easily unplugged.
Placez l’imprimante près d’une prise de contacte où la fiche peut être débranchée facilement.
•Do not let the power cords become damaged or frayed.