S1F76540 Series

◊Setup conditions of Figure 2.16

• Internal clock

: ON (Low Output mode)

• Booster circuit

: ON

• Regulator

: ON

•Thermistor resistor : RT

◊Power-off procedure

•Set the POFF1 pin to low (VI) to turn off all circuits.

◊Regulator temperature coefficient

•For the regulator setup and notes, see the “voltage regulator circuit” section of the function.

•The thermistor resistor (RT) has the non-linear temperature characteristics. To correct them to the linear char- acteristics, insert the RP as shown Figure 2.16.

◊Application in other setup conditions

•When used in the High Output mode, connect the FC pin to the VI pin.

S1F76540

Series

 

 

S1F70000 Series Technical Manual

EPSON

2–37