Extron electronic SGS 408 manual Installation, cont’d, Cabling, Tabletop/desktop mounting

Installation, cont’d

Tabletop/desktop mounting

For tabletop or desktop placement, install the self-adhesive rubber feet/pads (provided) onto the four corners of the bottom of the enclosure.

Cabling

Up to eight input devices that produce component video, RGsB, RGBS, or RGBHV signals, can be connected to the switcher. The switcher can be connected to up to four output devices (two program and two preview) that accept RGBS or RGBHV signals, and, optionally, to one program output device that accepts DVI signals.

To cable the switcher, do the following:

1.Use BNC connectors to attach cables from the input devices to the switcher. Figure 2-3 shows the connection options.

R/R-Y	R/R-Y	R/R-Y	R/R-Y
G/Y	G/Y	G/Y	G/Y
B/B-Y	B/B-Y	B/B-Y	B/B-Y

Component	RGsB	RGBS	RGBHV
	(input only)

Figure 2-3 — Input connections

2.Use BNC connectors, 15-pin HD connectors, or a DVI connector to attach cables from the switcher to the output devices. Figure 2-4 shows the connection options.

15-pin HD

RGBS RGBHV DVI-D

Figure 2-4 — Output connections

Figure 2-5 shows a typical system installation and its cable connections.

See the next chapter, “Operation”, for information on configuring and using the switcher.

2-4 SGS 408 Switcher • Installation