A-10 Netopia ISDN Modem User’s Guide
Command | Description |
&F | Restores all factory default settings. |
H | Hangs up the current connection. |
IIdentification
I0 displays the product and options ID.
I1 displays the flash memory checksum.
I3 displays the modem model, interface type, firmware revision number, firmware release date, and boot version number.
OEnter connect state. Causes the ISDN modem to go out of command mode into online mode.
QResult code control
Q0 enables the output of result codes (default).
Q1 disables the output of result codes.
Q2 disables the output of result codes in answer mode only.
\Q | Serial port flow control | |
| \Q0 | disables flow control. |
| \Q1 | enables bidirectional XON/XOFF software |
|
| flow control. |
| \Q3 | enables bidirectional RTS/CTS hardware |
|
| flow control (default). |
%R | Provides an output list of all S registers. | |
%S | Displays internal manufacturing control number. | |
Sn? | Reads a specific S register setting. | |
Sn= | Writes to a specific S register. | |
\S | Reads the status of any parameters that have | |
| been modified through AT commands. | |
