6-14 Netopia ISDN Modem User’s Guide
If both ports are selected for a telephone number, incoming calls
ring devices attached to both ports simultaneously.
If you have only one phone number for your ISDN line and two
analog devices connected to the analog device ports, check the
Phone Port 1 and Phone Port 2 boxes in the Number 1 area. Calls
to telephone number 1 will ring both devices, allowing you to answer
the call on either device. Note, however, because you have only one
telephone number, you cannot place or receive more than one call
at a time.
For information on configuring call routing on a PC, see “Step 10:
Configuring call routing” on page 4-7. For information on configuring
call routing on a Macintosh computer, see “The Easy Setup window”
on page 5-6.
The table below shows how the call routing settings you specify in
the Netopia configuration software determine how incoming calls on
phone number 1 and phone number 2 are routed to the two analog
device ports (Port 1 and Por t 2). (If the box beside the port is
checked, calls are routed to that port.)