4-4 Netopia ISDN Modem User’s Guide
Steps 5 to 9:
Running ISDN Assistant ISDN Assistant is a program that detects the switch type and
configures the SPID(s). ISDN Assistant automatically runs if it
detects any change to the configuration parameters, for example, if
the ISDN modem is connected to a different ISDN line.
Note: You will need the ISDN telephone or directory numbers from
the configuration parameters you entered on your ISDN worksheet.
For information, see the “Use your ISDN worksheet” section on
page 2-8.
5. Double-click the Netopia icon. A message appears. If you don’t
want ISDN Assistant to configure your ISDN modem, click the
Cancel button and go on to the “About the configuration dialog
box” section on page 4-6.
6. If you want to run ISDN Assistant, wait about 30 seconds while
the program configures your switch type. A status message will
appear. Then, after the switch type is configured, the dialog box
for the first telephone number appears.
7. Enter the telephone number for your ISDN line.
Note: You don’t need to enter delimiters like parentheses “( )”
or hyphens “-”.