Finalizing the Installation (for qualified installers only) | 43 |
LP Conversion Instructions
Install the conversion kit prior to installing the fireplace to ensure proper gas use.
1Remove the glass (see page 36). Remove the logs and coals (if installed - page 39)
2 Remove the grate (4 screws hold it in place).
3Remove the two shelves on the side of the orifice cover (2 screws hold each one in place).
4 Remove the orifice cover (the plate over the air shutter levers – 2 screws hold it in place).
© Travis Industries | 4090102 |
