38 Finalizing the Installation (for qualified installers only)
Glass Frame Removal and Installation
WARNING: Prior to removing the glass, shut off gas to the appliance (or remove the
batteries from the battery box and shut off electricity to the fireplace). This
prevents any chance of accidental burner ignition when accessing the firebox.
Warning: The appliance must be completely cool before removing the glass.
Warning: Do not strike or slam the glass.
Remove the glass trim (see directions to the right).
The glass frame is held in place with two latches along the top and two slots, with brackets, along the bottom. Insert the glass latch tool into the latch, pull it forward and up to detach the latches (see pictures below). Once the latches are free, pivot the frame out and lift it off the brackets at the bottom of the glass frame.
Glass Frame
Glass Trim
Attach the glass trim to the glass frame by inserting the hooks on the trim over the studs on the glass frame. When properly aligned, the frame will push straight in and drop into place.
Figure 25
© Travis Industries | 4090102 |
