Fortinet 5.0 Patch 6 - page 109

Fortinet 109 FortiWeb 5.0 Patch 6 Administration Guide
1. Go to System > Config > Config-Synchronization.
To access this part of the web UI, your administrator's account access profile must have
Read and Write permission to items in the Network Configuration category. For details, see
“Permissions” on page 47.
2. In Peer FortiWeb IP, type the IP address of the remote FortiWeb appliance that you want to
receive configuration items from your local FortiWeb appliance.
3. In Peer FortiWeb Port, type the port number that the remote FortiWeb appliance uses to
listen for configuration synchronization. The default port is 8333.
4. In Peer FortiWeb Password, type the password of the administrator account named admin
on the other FortiWeb appliance.
5. In Synchronization Type, select either:
•Full — Syncs all configuration except:
• Network interface used for synchronization: ensures that future syncs are not broken
• Administrator accounts
• Access profiles
• Web UI settings
•Partial — Syncs all configuration except:
•System
•Router > Static > Static Route
•Policy > Web Protection Profile
•Server Objects > Server Health Check
•Server Objects > Service
•Policy > Server Policy > Server Policy
This option is not available if the FortiWeb appliance is operating in reverse proxy mode.
See also “Supported features in each operation mode” on page 62.