Fortinet 591 FortiWeb 5.0 Patch 6 Administration Guide
report. (To start at the beginning of the report configuration instructions, see “To configure a
report profile” on page 587.)
Setting
name
Description
Time Period Select the time span of the report, such as This Month or Last N
Days.
Alternatively, select and configure From Date and To Dat e.
Past N Hours
Past N Days
Past N Weeks
Enter the number N of the appliance of time.
This option appears only when you have selected Last N Hours,
Last N Days, or Last N Weeks from Time Period, and therefore must
define N.
From Date
Hour
Select and configure the beginning of the time span. For example,
you may want the report to include log messages starting from
May 5, 2006 at 6 PM. You must also configure To Dat e.
To Da te
Hour
Select to configure the end of the time span. For example, you may
want the report to include log messages up to May 6, at 12 AM. You
must also select and configure From Date.
None Select this option to include all log messages within the time span.
Include logs that match
the following criteria
Select this option to include only the log messages whose values
match your filter criteria, such as Priority. Also select whether log
messages must meet every other configured criteria (all) or if
meeting any one of them is sufficient (any) to be included.
To exclude the log message s which match a criterion, mark its not
check box, located on the right-hand side of the criterion.
Criteria are the fields of log messages. For more information on log
messages, see the FortiWeb Log Reference.