Fortinet 88 FortiWeb 5.0 Patch 6 Administration Guide
2. Go to System > Maintenance > Backup & Restore.
To access this part of the web UI, your administrator's account access profile must have
Read and Write permission to items in the Maintenance category. For details, see
“Permissions” on page 47.
3. In the Firmware area, click Boot alternate firmware.
A warning message appears.
4. Click OK.
A message appears instructing you to refresh your browser in a few minutes after the
appliance has booted the other firmware.
To boot into alternate firmware via the local console CLI
1. Install firmware onto the alternate partition (see “Installing alternate firmware” on page 84).
2. Connect your management computer to the FortiWeb console port using a RJ-45-to-DB-9
serial cable or a null-modem cable.
3. Initiate a connection from your management computer to the CLI of the FortiWeb appliance,
and log in as the admin administrator, or an administrator account whose access profile
contains Read and Write permissions in the Maintenance category.
For details, see “Connecting to the web UI or CLI” on page 71.
4. Enter the following command to restart the FortiWeb appliance:
execute reboot
5. As the FortiWeb appliances starts, a series of system startup messages appear.
Press any key to display configuration menu........
Immediately press a key to interrupt the system startup.
You have only 3 seconds to press a key. If you do not press a key soon enough, the
FortiWeb appliance reboots and you must log in and repeat the execute reboot
command.