Fortinet 5.0 Patch 6 - page 434

Fortinet 434 FortiWeb 5.0 Patch 6 Administration Guide
5. Click OK.
6. Click Fetch URL.
A dialog appears.
7. In the Pserver drop-down list, select the IP address of a physical server.
In Protocol, select whether to connect to the back-end web server using either HTTP or
HTTPS.
In Port, type the TCP port number on which the physical server listens for HTTP/HTTPS
connections. The valid range is from 0 to 65,535. Typically HTTP is port 80; HTTPS is port
443.
Severity When rule violations are recorded in the attack log, each log message
contains a Severity Level (severity_level) field. Select which severity
level the FortiWeb appliance will use when it logs a violation of the rule:
•Low
•Medium
• High
The default value is High.
Trigger
Action
Select which trigger, if any, that the FortiWeb appliance will use when it logs
and/or sends an alert email about a violation of the rule. See “Configuring
triggers” on page 557.
Setting
name
Description