Fortinet 5.0 Patch 6 - page 418

Fortinet 418 FortiWeb 5.0 Patch 6 Administration Guide
5. Click OK.
6. Click Create New to add an entry to the set.
A dialog appears.
7. Configure these settings:
Severity When rule violations are recorded in the attack log, each log
message contains a Severity Level (severity_level) field.
Select which severity level the FortiWeb appliance will use when it
logs a violation of the rule:
•Low
•Medium
•High
The default value is High.
Trigger Action Select which trigger, if any, that the FortiWeb appliance will use
when it logs and/or sends an alert email about a violation of the
rule. See “Configuring triggers” on page 557.
Setting
name
Description
Host Select which protected hosts entry (either a web host name or IP address)
that the Host: field of the HTTP request must be in to match a valid start
page.
This option is available only if Host Status is enabled.
Host Status Enable to require that the Host: field of the HTTP request match a
protected hosts entry in order to match a valid start page. Also configure
Host.
Type Select whether URL Pattern is a Simple String (that is, a literal URL such as
/index.html) or a Regular Expression.
Note: If Default is Yes, you must select Simple String and provide the exact
redirect/session initiation URL in URL Pattern. (A regular expression does not
specify a single definite destination, and therefore is not a valid configuration
in that case.)