Fortinet 86 FortiWeb 5.0 Patch 6 Administration Guide
8. To verify that the firmware was successfully installed, log in to the web UI and go to
System > System > Status.
In the System Information widget, the Firmware Version row indicates the currently installed
firmware version.
To install alternate firmware via the CLI
1. Download the firmware file from the Fortinet Technical Support web site:
https://support.fortinet.com/
2. Connect your management computer to the FortiWeb console port using a RJ-45-to-DB-9
serial cable or a null-modem cable.
3. Initiate a connection from your management computer to the CLI of the FortiWeb appliance,
and log in as the admin administrator, or an administrator account whose access profile
contains Read and Write permissions in the Maintenance category.
For details, see “Connecting to the web UI or CLI” on page 71.
4. Connect port1 of the FortiWeb appliance directly or to the same subnet as a TFTP server.
5. Copy the new firmware image file to the root directory of the TFTP server.
6. If necessary, start your TFTP server. (If you do not have one, you can temporarily install and
run one such as tftpd (Windows, Mac OS X, or Linux) on your management computer.)
7. Verify that the TFTP server is currently running, and that the FortiWeb appliance can reach
the TFTP server.
To use the FortiWeb CLI to verify connectivity, enter the following command:
execute ping 192.168.1.168
where 192.168.1.168 is the IP address of the TFTP server.
8. Enter the following command to restart the FortiWeb appliance:
execute reboot
9. As the FortiWeb appliances starts, a series of system startup messages appear.
Press any key to display configuration menu........
10.Immediately press a key to interrupt the system startup.
If you successfully interrupt the startup process, the following messages appears:
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter G,F,B,Q,or H:
Because TFTP is not secure, and because it does not support authentication and could
allow anyone to have read and write access, you should only run it on trusted
administrator-only networks, never on computers directly connected to the Internet. If
possible, immediately turn off tftpd off when you are done.
You have only 3 seconds to press a key. If you do not press a key soon enough, the FortiWeb
appliance reboots and you must log in and repeat the execute reboot command.