Fortinet 5.0 Patch 6

Fortinet 110 FortiWeb 5.0 Patch 6 Administration Guide

To test the connection settings, click Test. Results appear in a pop-up window. If the

configuration sync test connection succeeds, this message should appear:

Service is available...

If the following message appears:

Service isn't available...

verify that:

• the other FortiWeb is the same model

• the other FortiWeb is configured to listen on your indicated configuration sync port

number (see “Config-Sync” on page 52)

• the other FortiWeb’s admin account password matches

• firewalls and routers between the two FortiWebs allow the connection

6. Click Synchronize.

A dialog appears, warning you that all policies and profiles with identical names will be

overwritten on the other FortiWeb, and asking if you want to continue.

7. Click Yes.

The FortiWeb appliance sends its configuration to the other, which synchronizes any

identically-named policies and settings. Time required varies by the size of the configuration

and the speed of the network connection. When complete, this message should appear:

Config. synchronized successfully.