Fortinet 52 FortiWeb 5.0 Patch 6 Administration Guide
2. Configure these settings:
Setting name Description
Web Administration Ports
HTTP Type the TCP port number on which the FortiWeb appliance
will listen for HTTP administrative access. The default is 80.
This setting has an effect only if HTTP is enabled as an
administrative access protocol on at least one network
interface. For details, see “Configuring the network
interfaces” on page 113.
HTTPS Type the TCP port number on which the FortiWeb appliance
will listen for HTTPS administrative access. The default is 443.
This setting has an effect only if HTTPS is enabled as an
administrative access protocol on at least one network
interface. For details, see “Configuring the network
interfaces” on page 113.
Config-Sync Type the TCP port number on which the FortiWeb appliance
will listen for configuration synchronization requests from the
peer/remote FortiWeb appliance. The default is 8333.
For details, see “Replicating the configuration without
FortiWeb HA (external HA)” on page 107.
Note: This is not used by HA. See “Configuring a high
availability (HA) FortiWeb cluster” on page 97.
Timeout Settings
Idle Timeout Type the number of minutes that a web UI connection can be
idle before the administrator must log in again. The maximum
is 480 minutes (8 hours). To maintain security, keep the idle
timeout at the default value of 5 minutes.