Fortinet 5.0 Patch 6 - page 585

Fortinet 585 FortiWeb 5.0 Patch 6 Administration Guide
5. Enable traps for the SNMP events that you want FortiWeb to notify your SNMP managers.
6. Click OK.
7. To verify your SNMP configuration and network connectivity between your SNMP manager
and your FortiWeb appliance, be sure to test both traps and queries (assuming you have
enabled both). Traps and queries typically occur on different port numbers, and therefore
verifying one does not necessarily verify that the other is also functional. To test queries,
from your SNMP manager, query the FortiWeb appliance. To test traps, cause one of the
events that should trigger a trap.
S
N
M
P
Tr
a
p
s
While most trap events are described by their names, the following events occur when a
threshold has been exceeded:
•CPU usage is high — CPU usage has exceeded 80%.
•Memory usage is high — Memory (RAM) usage has exceeded 80%.
•Log disk space low — Disk space usage for the log partition/disk has exceeded 90%.
For more information on supported traps and queries, see “MIB support” on page 586.