Fortinet 581 FortiWeb 5.0 Patch 6 Administration Guide
3. Configure the following:
4. Click Apply.
5. Create at least one SNMP community to define which hosts are allowed to query, and which
hosts will receive traps. See “Configuring an SNMP community”.
See also
•Configuring the network interfaces
•Configuring an SNMP community
•MIB support
Configuring an SNMP community
An SNMP community is a grouping of equipment for network administration purposes. You
must configure your FortiWeb appliance to belong to at least one SNMP community so that
community’s SNMP managers can query the FortiWeb appliance’s system information and
receive SNMP traps from the FortiWeb appliance.
Setting name Description
SNMP Agent Enable to activate the SNMP agent, so that the FortiWeb appliance
can send traps and receive queries for the communities in which
you enabled queries and traps.
For more information on communities, see “Configuring an SNMP
community” on page 581.
Description Type a comment about the FortiWeb appliance, such as
dont-reboot. The description can be up to 35 characters long,
and can contain only letters (a-z, A-Z), numbers, hyphens ( - ) and
underscores ( _ ).
Location Type the physical location of the FortiWeb appliance, such as
floor2. The location can be up to 35 characters long, and can
contain only letters (a-z, A-Z), numbers, hyphens ( - ) and
underscores ( _ ).
Contact Type the contact information for the administrator or other person
responsible for this FortiWeb appliance, such as a phone number
(555-5555) or name (jdoe). The contact information can be up to
35 characters long, and can contain only letters (a-z, A-Z), numbers,
hyphens ( - ) and underscores ( _ ).