Fortinet 664 FortiWeb 5.0 Patch 6 Administration Guide
7. Verify that the TFTP server is currently running, and that the FortiWeb appliance can reach
the TFTP server.
To use the FortiWeb CLI to verify connectivity, enter the following command:
execute ping 192.168.1.168
where 192.168.1.168 is the IP address of the TFTP server.
8. Enter the following command to restart the FortiWeb appliance:
execute reboot
9. As the FortiWeb appliances starts, a series of system startup messages appear.
Press any key to display configuration menu........
10.Immediately press a key to interrupt the system startup.
If you successfully interrupt the startup process, the following messages appears:
[G]: Get firmware image from TFTP server.
[F]: Format boot device.
[B]: Boot with backup firmware and set as default.
[Q]: Quit menu and continue to boot with default firmware.
[H]: Display this list of options.
Enter G,F,B,Q,or H:
Please connect TFTP server to Ethernet port "1".
11.If the firmware version requires that you first format the boot device before installing
firmware, type F. Format the boot disk before continuing.
12.Typ e G to get the firmware image from the TFTP server.
The following message appears:
Enter TFTP server address [192.168.1.168]:
13.Type the IP address of the TFTP server and press Enter.
The following message appears:
Enter local address [192.168.1.188]:
14.Type a temporary IP address that can be used by the FortiWeb appliance to connect to the
TFTP server.
The following message appears:
Enter firmware image file name [image.out]:
You have only 3 seconds to press a key. If you do not press a key soon enough, the FortiWeb
appliance reboots and you must log in and repeat the execute reboot command.