Freecom Technologies Storage Gateway NETWORK HARD DRIVE manual Freecom Storage Gateway FSG

Freecom Storage Gateway (FSG)

Subnet mask:	Enter the subnet mask of your router (example:
GB	255.255.255.0).
Standard Gateway:	IP address of your router, e.g., 192.168.2.1.
5

Using the FSG behind a router when employing a fixed IP address

1.Open 'Services' -> 'File Server (CIFS)' and enable 'Open Windows File Sharing (CIFS/ SBM) on the WAN port'.

2.If you want to access the FSG from outside the network (e.g., over the Internet) via HTTP (port 80) and FTP (port 21), you will need to forward these ports on your router to the IP address assigned by the router to the FSG. In this example, you are required to forward ports 21 and 80 to the IP address 192.168.2.100. For more details on forwarding ports, please refer to your router's manual.

3.Please make sure that 'Services' -> 'HTTP Server' -> 'Open HTTP server to the outside' and 'access for configuration pages from the outside” / 'FTP Server' 'open FTP server for the outside' are enabled in FSG's Configuration window.

Note: The FSG DynDNS options do not function when the FSG is used behind a router. Please enable the router's DynDNS option.

82