| Freecom Storage Gateway (FSG) |
GB | 6. Select 'Internet Protocol (TCP/IP), click 'Properties' and check to make sure that |
'Obtain an IP address automatically' is enabled. |
7.Click 'OK' and close all windows for network and
8.Make sure that the computer is connected to the FSG and check the TCP/IP proper- ties (see below). If you notice any problems, you can restart the computer.
Check the TCP/IP properties.
To check the computer's TCP/IP configuration:
1.Click 'Start' in the Windows taskbar and then press 'Run'. The 'Run' screen opens.
2.Enter 'cmd' and then click 'OK'. A command window appears on the screen.
3.Type in ipconfig /all. Your configuration details are displayed and should be as follows if you are using the default settings for TCP/IP recommended by Freecom:
4.The IP is between 192.168.1.2 and 192.168.1.254.
5.The subnet mask is 255.255.255.0.
6.The standard Gateway is 192.168.1.1.
7.Type in exit.
MacOS 8.6 or 9.x
With Macintosh OS 7 and higher, TCP/IP comes preinstalled on the Macintosh. To use DHCP, you need to configure TCP/IP on each Macintosh in the network.
1. Open Apple's 'System Preferences' and hit 'TCP/IP'. System Preferences TCP/IP opens:
