Freecom Technologies Storage Gateway NETWORK HARD DRIVE Connecting External Drivers USB, Sata

Connecting External Drivers (USB, SATA)

File systems

The attached USB device has use in a file system format supported by the FSG. The supported file systems are:

FAT32

NTFS (read-only access)

ext2

ext3

reiserfs

HFS(+) (read-only access)

Note: To obtain full access to the external drive, we recommend that you use FAT32 when formatting the drive.

5.6.2eSATA

Connection

To install a S-ATA external storage device, you must first shutdown the FSG. Go to the web interface and log in to the administration site. Go to the shutdown item of the Hardware menu and press shutdown. Wait till the FSG is shutdown and plug in the eS- ATA connector of the external device into the FSG eS-ATA port. Make sure the eS-ATA device is powered on and turn the FSG back on. The storage on the eS-ATA device should show up as a shared folder. This shared folder can be reached via FTP, HTML and SMB (Windows file sharing). The folder will be mounted with read and write rights for all in the root folder (/).

Filesystems

An attached S-ATA Disk must be formatted in a file system supported by the FSG. The supported file systems are:

FAT32

NTFS (read-only)

ext2

ext3

reiserfs

HFS(+) (read-only)

Remark: To have read/write access on the external disk, we recommend formatting the disk in FAT32 format.

GB

5

97