CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES 
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3Items to check before contacting the dealer where you bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : The scanning does not start.
Back to the trouble shooting index
Are the documents loaded correctly on the ADF paper chute? | Load the documents correctly onto the ADF paper chute. |
NO |
|
YES |
|
Is the ADF closed completely? | Close the ADF completely. |
NO |
|
YES |
|
| Connect the interface cable correctly. |
Is the interface cable connected correctly? | Reference : "Getting Started" 2.2 Connecting the scanner to |
NO | your PC |
YES |
|
Is the connector of interface cable broken? | Use a new interface cable and correctly connect it. |
YES |
|
NO |
|
(When using the scanner on SCSI interface) Is the SCSI ID set correctly?
YES
Does the scanning start after running ON the scanner again?
NO
If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
NO
YES
Turn OFF the scanner and set the SCSI ID correctly, then turn ON the scanner again.
Reference : "Getting Started" 2.2 Connecting the scanner to your PC
The scanner operation is normal.
