CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
6 TROUBLESHOOTING
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
8.1 Document size
8.2 Document quality
8.3 Maximum ADF capacity
8.4 Area not to be perforated
8.5 Double feed detection conditions
8.6 Background Color Areas
8.7 Job Separation Sheet
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
8.6 Background Color Areas
Paper white detection is performed in the shaded area as shown in the Figure below. The top 3mm area on both sides of a document, should have no printing.
When the [White Level Follower] is selected, the color of this area must be the dropout color (color you want to remove) or the document's background color (white) .
If the above cannnot be performed, turn the [White Level Follower] off before scanning.
For the details on dropout color, please refer to section 3.5 Selecting a color to drop out.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
