CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES 
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3Items to check before contacting the dealer where you bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Appendix
Symptom : Paper jams occur frequently.
Back to the trouble shooting index
Do the documents satisfy the conditions described in "8.2 Document Quality"?
YES
Is there any debris in the ADF?
NO
Are all the consumables (Pick roller set, Brake roller) installed correctly?
YES
Is any of consumables (Pick roller set, Brake roller) dirty?
NO
Is any of consumables (Pick roller set, Brake roller) worn out? Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
NO
YES
NO
YES
YES
Use documents that satisfy the requirements.
Clean the ADF or remove debris from the ADF.
Correctly install the consumable (Pick roller set, Brake roller) , if needed.
Clean the dirty consumable UI.
Replace the consumable, if needed. Refer to "Replacing Consumables" for details on the consumable counter.
