CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES 
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3Items to check before contacting the dealer where you bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Symptom : Double-feed errors occur frequently.
Back to the trouble shooting index
Do the documents satisfy the conditions described in "8.2 |
| Use documents that satisfy the requirements. |
Document Quality"? |
| |
NO |
| |
|
| |
YES |
|
|
When the |
| Satisfy the |
detection conditions satisfied? |
| |
NO |
| |
|
| |
YES |
|
|
Were the documents fanned before loaded onto the ADF paper |
| Fan the documents before loading, or reduce the number of |
chute? | NO | sheets of the documents. |
|
| |
YES |
|
|
Appendix
Have the documents just been printed out by a copier or laser printer?
NO
Is the document stack over 20mm(A4)/10mm(A3)?
NO
Are all the consumables (Pick roller set, Brake roller) installed correctly?
YES
Is any of consumables (Pick roller set, Brake roller) dirty?
NO
Is any of consumables (Pick roller set, Brake roller) worn out? Check the consumable counter.
NO
If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
YES
YES
NO
YES
YES
Fan the documents 3 or 4 times to remove static electricity from the paper.
Reduce the number of sheets in the stack, referring to "8.3 Maximum ADF capacity".
Correctly install the consumable(Pick roller set, Brake roller), if needed.
Clean the dirty consumable.
Replace the consumable, if needed. Refer to "" for details on the consumable counter.
