Fujitsu fi-5650C specifications Setting of pre-pick mode

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING 7 ONLINE SETUP

7.1 Online setup

7.2 Double-feed detection

7.3 Setting of Page Edge Filler

7.4 Setting dropout color

7.5 Setting of pre-pick mode

7.6 Resetting the consumables counters

7.7 Adjusting the offset

7.8 Adjust the magnification

7.9 Power saving

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS Appendix

7.5 Setting of pre-pick mode

The settings of the pre-pick mode are as follows.

1.Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel].

2.Click [Device Setting 2] tab, and select [Pre-Pick] from [Preferences].

●Yes : The setting prioritizes for the processing speed. The next document will be fed to the pick roller automatically.

●No : The next document won't be fed to the pick roller automatically.

ATTENTION

FUJITSU TWAIN32 Scanner driver selection has precedence over this setting.

All Rights Reserved, Copyright (C) PFU LIMITED 2004