Fujitsu fi-5650C specifications Setting of Page Edge Filler

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING 7 ONLINE SETUP

7.1 Online setup

7.2 Double-feed detection

7.3 Setting of Page Edge Filler

7.4 Setting dropout color

7.5 Setting of pre-pick mode

7.6 Resetting the consumables counters

7.7 Adjusting the offset

7.8 Adjust the magnification

7.9 Power saving

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS Appendix

7.3Setting of Page Edge Filler

1.Select [All Programs] - [Scanner Utility for Microsoft Windows] from [Start] menu then click [FUJITSU Software Operation Panel].

2.When you scan documents with the ADF, click [Device Setting 2] tab, and select [PageEdgeFille(ADF)] from [Preferences]. Then specify the area to delete by entering value in [Top], [Bottom], [Right] and [Left].

ATTENTION

If you configure the Page Edge Filter in both [Software Operation Panel] and [FUJITSU TWAIN32 Scanner Driver], the images of [Software Operation Panel] configuration will overwrite the images of FUJITSU TWAIN32 Scanner Driver configuration.

All Rights Reserved, Copyright (C) PFU LIMITED 2004