CONTENTS
Introduction
1 NAMES AND FUNCTIONS OF PARTS
2 BASIC SCANNER OPERATION
3 SCANNING VARIOUS TYPES OF DOCUMENTS
4 DAILY CARE
5 REPLACING CONSUMABLES
Symptom : Images are distorted or blurred.
Back to the trouble shooting index |
|
Are the upper/lower glasses inside the ADF clean? | Clean dirty locations. |
| NO |
YES |
|
6 TROUBLESHOOTING
6.1 Removing jammed documents
6.2 Indications of operator panel for errors
6.3Items to check before contacting the dealer where you bought the scanner
6.4 Checking labels on the scanner
7 ONLINE SETUP
8 DOCUMENT SPECIFICATION OF ADF
9 OPTIONS
10 SCANNER SPECIFICATIONS
Is the ADF cover pressed down or heavy object placed on the ADF during scanning?
NO
Is something causing the scanner to vibrate during scanning?
NO
YES
YES
Do not press down the ADF or place heavy object on the ADF during scanning.
Do not allow anything to cause the scanner to vibrate while scanning.
Appendix
Is the scanner installed on a flat, level surface? | Install the scanner on a flat, level surface. |
| NO |
YES
If you cannot solve the problem after taking measures, check the items in "6.3 Items to check before contacting the dealer where you bought the scanner" and contact the dealer or an authorized FUJITSU service provider.
All Rights Reserved, Copyright (C) PFU LIMITED 2004
