Fujitsu fi-5650C Online setup Continued from the previous page, Contents, Dropout Color, Pre pick

CONTENTS

Introduction

1 NAMES AND FUNCTIONS OF PARTS

7.1 Online setup (Continued from the previous page)

The following shows the contents of the setup:

2 BASIC SCANNER OPERATION

3 SCANNING VARIOUS TYPES OF DOCUMENTS

4 DAILY CARE

5 REPLACING CONSUMABLES

6 TROUBLESHOOTING 7 ONLINE SETUP

No Function

3	Dropout Color
4	Pre pick
5	Consumable counter

Description

Use this function to drop out a color in Grayscale or Binary mode.

Select "Yes" to enable Prepicking, otherwise select "No".

Used to know when to replace the consumable items. After replacing the consumable, reset this counter.

Settings	Default
Red/Green/Blue/White	Green
YES/NO	YES
To reset

7.1 Online setup

7.2 Double-feed detection

6 Offset adjustment

Set the horizontal and vertical offset for scanning.

Main: -2 to 3 (can be changed by 0.5mm)

Sub: -2 to 3 (can be changed by 0.5mm)

Right & left : 0mm

Top & bottom : 0mm

7.3 Setting of Page Edge Filler

7.4 Setting dropout color

7.5 Setting of pre-pick mode

7.6 Resetting the consumables counters

7.7 Adjusting the offset

7.8 Adjust the magnification

7.9 Power saving

8 DOCUMENT SPECIFICATION OF ADF

9 OPTIONS

10 SCANNER SPECIFICATIONS Appendix

7	Vertical magnification Adjustment Set the magnification of a scanned image.
8	Power saving	Set the waiting time for the scanner to
		switch into the power save mode
		1 2

All Rights Reserved, Copyright (C) PFU LIMITED 2004

-6.3% to 6.3% (can be changed by 0.1%)

You can set the waiting time from 5 minutes to 55 minutes (can be changed by 5 minutes)

0%

15minutes