Error rate | Fujitsu MCJ3230AP instruction

2.1 Optical Disk Drive Specifications

Table 2.3 Environmental and power requirements (2 of 2)

		Item		Specification

	Altitude	Operating		3,000 m (10,000 ft) or less

		Non Operating		12,000 m (40,000 ft) or less

	Ambient for	Air flow		Unused (*4)
	purity
	purity	Air purity		General office environment or better
		Air purity		General office environment or better
				(dust perticles: Class 5 millions or less)

		Note:
		*1	At random seek or read/write. Excluding pulse waveform under 500 us or
			less.
		*2	It demonstrates in an installation environment of a temperature of 25°C,
			voltage of 5 V.
			See Section 4.4.8 for information on the power management function.
		*3	The efficiency is specified in an environment of a temperature of 25°C and
			0° horizontal level placement.
		*4	For details, refer to section 3.1.3 'Air Flow'

1.Current limiter value for +5 VDC power: 5 A or less

2.Specifications under transporting condition are under the packaging specified by Fujitsu.

3.A voltage drop may occur depending on the used power supply or power cable.

2.1.4Error rate

Data blocks to be accessed are evenly distributed on the disk. Errors due to disk defects are not included.

(1) Bit error rate after ECC processing

The error rate after ECC processing must be 10-12or less. An optical disk cartridge whose raw error rate is 10-4or less should be used.

(2) Positioning error rate

The positioning error rate must be 10-6or less. (with retry)

C156-E205-01EN

2-5

Image 41

Fujitsu MCJ3230AP manual Error rate, Environmental and power requirements 2

Contents

MCJ3230AP Optical Disk Drive Product Manual Handling of This Manual For Safe Operation Revision History This page is intentionally left blank Page Overview of Manual Preface Acronyms and Abbreviations Conventions for Alert MessagesGlossary Preface Disclaimer Device damage Important Alert ItemsImportant Alert Messages Important Alert Items This manual Ansi ATA/ATAPI-5ISO/IEC JTC1 *1 Fujitsu Limited Contents Host Interface Contents Reset response Signature Read Long command Receive Diagnostic Results command Operation and Cleaning IN-1 GL-1AB-1 Figures Illustrations Tables GET Media Status command Mode Parameter List Mode Parameter Header Head cleaner Page This page is intentionally left blank General Description Features Performance Maintainability/operability Reliability ATA/ATAPI-4 AdaptabilityInterface Features Drive model Drive Configuration Mechanical sections Configuration Control circuit section Control circuit section block diagram Drive Configuration System configuration with one optical disk drive System Configuration Optical Disk Drive Specifications SpecificationsModel and product number Model and order number Specifications 1 Drive specifications Optical disk cartridge MB media GB media Density Specifications 2 Environmental and power requirements 1 Environmental and power requirements Environmental and power requirements 2 Error rate MTBF= Recommended optical disk cartridge specifications Optical Disk Cartridge SpecificationsRecommended optical disk cartridge specifications Optical disk cartridge Optical disk cartridge Optical Disk Cartridge Specifications Disk specifications Disk specifications Defect Management Defect management schematic diagram Example of alternate processing Environmental Requirements Installation RequirementsTemperature measurement point Surface temperature measurement points Air flow Temperature requirements and measuring methodTemperature requirements at measurement points Air purity Temperature rise under several conditionsTemperature at each measuring point Reference Mounting Requirements External dimensions Dimensions Dimensions without panel Installation directions Installation direction Centers of gravity Centers of gravity Mounting frame structure Service clearance Current waveform +5 VDC Power Supply Requirements Cable Connections Drive connectorsCN1 +5 VDC Return GND Drive connection Cable connector specificationsCable connector specifications Mode setting Jumper SettingsJumper settings at factory shipping 13 Slave device setting 15 Cable select examples General notes Page 16 Packing style Checks before mounting the drive Mounting procedureMounting Confirming initial operations Connection check Dismounting Drive Installation Requirements Host Interface Pin Assignment Connector pin assignments 1/2 Connector pin assignments 2/2 Signal description 1/2 Signal Description Signal description 2/2 1 I/O registers Interface RegistersI/O port functions and mapping DA1 DA0 Alternate Status register ATA Command registerBit definitions of Alternate Status register Data register Bit definitions of Drive Address register Drive Address registerAtapi Byte Count register Bit definitions of Atapi Byte Count register Bit definitions of Error register Error registerAtapi Block Device Select register Bit definitions of Atapi Block Device Select register Atapi Features register ATA Features register10 Bit definitions of Atapi Features register ATA Sector Count register 1.14 Atapi Status register 1.13 Sector Number register12 I/O and C/D BSY Drdy Host Interface Various Processes Reset response Automatic alternate sector assignment function SignatureDefect sector management Read cache Cache functionData buffer MO write cache Media status notification function Power mode Power management functionActive mode Pre-idle mode Standby mode Idle modeSleep mode Standby timer Unsupported functions Power mode transition 16 LED indications LED Indications 17 Command codes and parameters ATA Commands 19 Power mode indication Check Power Mode E5h 20 Device Reset command Device Reset 08hExecute Device Diagnostic 90h 22 Self-diagnosis detailed code When device 1 is connected 24 GET Media Status command 23 Flush Cache commandFlush Cache E7h GET Media Status DAh Identify Packet Device A1h 25 Error register 27 Device parameter information 1/6 27 Device parameter information 2/6 27 Device parameter information 3/6 27 Device parameter information 4/6 27 Device parameter information 5/6 27 Device parameter information 6/6 29 NOP command 28 Idle Immediate commandIdle Immediate E1h NOP 00h Packet A0h 30 Packet command 31 SET Features command SET Features EFh32 FR register setting value DEV 35 Cylinder High register 33 Transfer setting values in the SC register34 Cylinder Low register Sleep E6h 36 Sleep command Standby Immediate E0h 38 Packet command codes and parameters Packet Commands 39 Erase command Erase command 41 Format Unit parameter list Format Unit command40 Format Unit command 43 Inquiry command Inquiry command RMB 44 Inquiry data 46 Mode parameters Mode Select 6 command45 Mode Select 6 command 49 Block descriptor 47 Mode parameter list48 Mode parameter header Read-Write error recovery 50 Mode Page Format 52 Changeable values in the read-write recovery Flexible disk 54 Flexible disk 55 Changeable values in flexible disk 58 Changeable values in the caching Caching 57 CachingWCE 61 Power Condition Page Variable Power Condition 60 Power Condition Verify Control 63 Verify Control 62 Power Condition Page Default value64 Verify Mode Verify Control Page default value Mode Select 10 command67 Mode Select 10 command Verify Control Page variable 69 Mode Parameter Header 68 Mode Parameter List 71 Page Control field Mode Sense 6 command70 Mode Sense 6 command 73 Mode parameter header 72 Mode parameter list 75 Mode Page Format Mode Sense 10 command76 Mode Sense 10 command 74 Block descriptor 78 Mode Parameter Header 77 Mode Parameter List 79 PREVENT/ALLOW Medium Removal command PREVENT/ALLOW Medium Removal command80 Response to Prevent/Allow/Eject START/STOP Unit Sense KEY Read Capacity command Read 10 command81 Read 10 command 82 Read Capacity command 84 Read Format Capacities command 11READ Format Capacities command83 Read Capacity data 85 Read Format Capacities data format 89 Read Defect Data 10 command Read Defect Data 10 command87 Current/Maximum capacity descriptor 88 Descriptor code definition 91 Defect List Header Read Defect Data 90 Defect List Format Read Defect Data 94 Read Defect Data 12 command Read Defect Data 12 command93 Sector Address Format 95 Defect List Format Read Defect Data 96 Defect List Header Read Defect Data Read Long command97 Read Long command Request Sense command 99 Request Sense command Receive Diagnostic Results command98 Receive Diagnostic Results command 100 Request sense data 101 Error code 103 Logical block address format 102 Sense Key code 104 ASC/ASCQ list 1/2 105 Format Progress Indication Bytes 104 ASC/ASCQ list 2/2 Seek command Send Diagnostic command106 Send Diagnostic command 107 Seek command 109 START/STOP/EJECT processing START/STOP Unit command108 START/STOP Unit command Test Unit Ready command Synchronize Cache command110 Synchronize Cache command 111 Test Unit Ready command Write 10 command Verify command112 Verify command 113 Write 10 command 114 Write and Verify command Write and Verify command Tnfy Write Buffer command115 Write Buffer command 116 Write Long command Write Long command Register/PIO data transfer timing TimingWrite Read 117 Register/PIO data transfer timing parameters Dmarq Dmack DIOR/DIOW Read Multiword DMA data transfer timing 118 Multiword DMA data transfer timing parameters Ultra DMA data in transfer continuous transfer timing Ultra DMA data in transfer initialization timing Ultra DMA data in transfer device end timing Ultra DMA data in transfer host stop timing Ultra DMA data in transfer host end timing Ultra DMA data in transfer host end timing Ultra DMA data out transfer continuous transfer timing Ultra DMA data out transfer initialization timing 11 Ultra DMA data out transfer device stop timing Ultra DMA data out transfer device stop timing 12 Ultra DMA data out transfer host suspend timing Ultra DMA data out transfer host suspend timing 13 Ultra DMA data out transfer device end timing Ultra DMA data out transfer device end timing 119 Ultra DMA data out transfer parameter 14 Power-on and reset timing Power-on and Reset Timing 120 Power-on and reset timing This page is intentionally left blank Operating Optical Disk Drive Operation and Cleaning Optical disk drive front view with panel Optical disk drive Operating Optical Disk Drive Inserting cartridge Inserting cartridge Removing cartridge Ejecting removing cartridge Head cleaner Cleaning Drive Optial disk cartridge Optical Disk Cartridge Operation Write protect tab Write protect tab How to stick an index label on the MO cartridge How to affix an index label on the MO cartridge See figure Operation and Cleaning Cleaning tool Cleaning Optical Disk CartridgeCleaning kit Packed items cleaning kit Cleaning procedure Cleaning procedure Cleaning procedure 10 Cleaning procedure Diagnosis Diagnosis and MaintenanceSelf-diagnostic function Test program Diagnostic commandInitial self-diagnosis Maintenance requirements Maintenance Information REV. no Revision number Glossary Error detection and correction Error correction codeRecording power Disk reference surface Status This page is intentionally left blank Acronyms and Abbreviations ODF ODDOEM PCA Index Index Execute Device Diagnostic 4-23 Execute Device Diagnostic General description 1-1 General notes Receive Diagnostic Results Index This page is intentionally left blank Fujitsu Limited This page is intentionally left blank MCJ3230AP Optical Disk READER’S Comment Form