Fujitsu MCJ3230AP manual GET Media Status command

Contents

Table 4.12	IO and Cod	4-11
Table 4.13	Bit definitions of ATAPI Status register								4-11
Table 4.14
Table 4.15
Table 4.16	LED indications		4-20
Table 4.17	Command codes and parameters						4-21
Table 4.18	CHECK POWER MODE command							4-22
Table 4.19	Power mode indication				4-22
Table 4.20	DEVICE RESET command					4-23
Table 4.21	EXECUTE DEVICE DIAGNOSTIC command									4-23
Table 4.22	Self-diagnosis detailed code					4-24
Table 4.23	FLUSH CACHE command					4-25
Table 4.24	GET MEDIA STATUS command							4-25
Table 4.25	Error register	4-26
Table 4.26	IDENTIFY PACKET DEVICE command								4-26
Table 4.27	Device parameter information (1/5)							4-27
Table 4.28	IDLE IMMEDIATE command						4-33
Table 4.29	NOP command		4-33
Table 4.30	PACKET command			4-34
Table 4.31	SET FEATURES command					4-35
Table 4.32	FR register setting value				4-35
Table 4.33	Transfer setting values in the SC register								4-36
Table 4.34	Cylinder Low register			4-36
Table 4.35	Cylinder High register			4-36
Table 4.36	SLEEP command		4-37
Table 4.37	STANDBY IMMEDIATE command							4-38
Table 4.38	Packet command codes and parameters								4-39
Table 4.39	ERASE command		4-40
Table 4.40	FORMAT UNIT command					4-41
Table 4.41	FORMAT UNIT parameter list						4-41
Table 4.42	Defect list header		4-41
Table 4.43	INQUIRY command			4-42
Table 4.44	INQUIRY data		4-43
Table 4.45	MODE SELECT (6) command						4-44
Table 4.46	Mode parameters		4-44
Table 4.47	Mode parameter list			4-45
Table 4.48	Mode parameter header				4-45
Table 4.49	Block descriptor		4-45
Table 4.50	Mode Page Format 4-46
Table 4.51	Read-Write error recovery page						4-46
Table 4.52	Changeable values in the read-write recovery page 4-47
Table 4.53	Default values for the read-write recovery page									4-47
Table 4.54	Flexible disk page		4-48

C156-E205-01EN xvii