Fujitsu MCJ3230AP manual Tables

Contents

Figure 4.10	Ultra DMA data out transfer (continuous transfer timing) 4-85
Figure 4.11	Ultra DMA data out transfer (device stop timing)				4-86
Figure 4.12	Ultra DMA data out transfer (host suspend timing)				4-87
Figure 4.13	Ultra DMA data out transfer (device end timing)				4-88
Figure 4.14	Power-on and reset timing			4–90
Figure 5.1	Optical disk drive front view (with panel) 5-2
Figure 5.2	Inserting cartridge	5-4
Figure 5.3	Removing cartridge	5-5
Figure 5.4	Optial disk cartridge		5-7
Figure 5.5	Write protect tab	5-8
Figure 5.6	How to stick an index label on the MO cartridge				5-9
Figure 5.7	Cleaning procedure (1)		5-12
Figure 5.8	Cleaning procedure (2)		5-13
Figure 5.9	Cleaning procedure (3)		5-13
Figure 5.10	Cleaning procedure (4)		5–14
Figure 6.1	Revision label 6-4
Figure 6.2	Revision number indication			6-4

Tables

Table 2.1	Model and order number		2-1
Table 2.2	Specifications 2-2
Table 2.3	Environmental and power requirements				2-4
Table 2.4	Recommended optical disk cartridge specifications					2-7
Table 2.5	Disk specifications	2–10
Table 3.1	Temperature requirements at measurement points					3-3
Table 3.2	Temperature at each measuring point (Reference)					3-4
Table 3.3	Cable connector specifications			3–13
Table 4.1	Connector pin assignments		4-2
Table 4.2	Signal description	4-4
Table 4.3	I/O port functions and mapping			4-6
Table 4.4	Bit definitions of Alternate Status register				4-7
Table 4.5	Bit definitions of Device Control register				4-7
Table 4.6	Bit definitions of Drive Address register				4-8
Table 4.7	Bit definitions of ATAPI Byte Count register 4-8
Table 4.8	Bit definitions of ATAPI Block Device Select register 4-9
Table 4.9	Bit definitions of Error register			4-9
Table 4.10	Bit definitions of ATAPI Features register				4-10
Table 4.11	Bit definitions of ATAPI Interrupt Reason register					4-10

xvi C156-E205-01EN