Operation and Cleaning

5.2 Cleaning Drive

When a dust or smoke of cigarette is stained to the lens actuator, a performance of whole drive may be down. Clean the lens actuator periodically using following head cleaner.

Note:

Cleaning period differs depending on the installation condition. Usually, cleaning period is once a three months.

Table 5.1 Head cleaner

Part name

Product number

Order number

 

 

 

Head cleaner

020470

CA90002-C980

 

 

 

(1) Cleaning method

Clean the head actuator with following method.

1.Turn on the power of the drive.

2.Insert the head cleaner.

3.When the head cleaner is automatically loaded, the optical head positioner moves back and forth and the cleaning brush mounted on the head cleaner cleans the object lens.

4.When the cleaning is finished, the head cleaner is automatically unloaded. (cleaning time: 15 seconds)

Device Damage: Be sure to use the dedicated head cleaner described above.

Check the cleaning brush state by opening the shutter of the head cleaner. If the tip of brush is open, use new head cleaner.

5-6

C156-E224-01EN

Page 134
Image 134
Fujitsu MCJ3230SS manual Cleaning Drive, Head cleaner