Fujitsu MCJ3230SS manual Verify mode, Variable values in the Verify control

4.3 SCSI Commands

If the Streaming Mode (SM) bit is 0, a test write operation may interrupt a read or write operation. If the bit is 1, the test write operation is suppressed during continuous read or write operation. Fujitsu recommends setting the SM bit to 0.

Verify Mode (VM) specifies a verify operation for the WRITE command.

Table 4.28 Verify mode

VM Description

0Always enable verify operation.

1Always disable verify operation.

2Conditionally enable verify operation (verify skip mode).

3Reserved

DevType specifies the device type that is returned in response to the Inquiry command. To validate the specified value, save it, then turn the power off and on again.

The values in the Verify control page can be saved.

	Table 4.29	Variable values in the Verify control page
Bit	7	6	5	4		3	2	1		0
Byte
2	1	1			0				11b
3		0					1Fh
4-7					0

	Table 4.30		Default values in the Verify control page
Bit	7	6		5	4		3	2	1		0
Byte
2	1	0				0				00b
3		0						0h
4-7						0

C156-E224-01EN 4-21