Mode parameters, Mode Parameter Header | Fujitsu MCJ3230SS specification

4.3 SCSI Commands

Table 4.33 Mode parameters

Bit
Byt	7	6	5		4	3		2	1	0
e
0-4				Mode Parameter Header
0-7					Block Descriptor

0-n					Mode Page (s)

The mode parameter list consists of Mode Parameter Header, Block Descriptor, and Mode Page.

Table 4.34 shows the format of the Mode Parameter Header field.

Table 4.34 Mode Parameter Header

Bit	7	6	5		4	3		2	1	0
Byte	7	6	5		4	3		2	1	0
Byte
0					Mode Data Length
1					Medium Type Code

2	WP					Reserved
3				Block Descriptor Length

Medium Type Code returns the following values:

•03h for normal MO media

•07h for overwrite MO media

•03h for other media or Not Ready state

The Write Protect (WP) bit indicates the state of the write protect key on the cartridge. If the WP bit is 1, the cartridge is write-protected.

Mode Data Length indicates the length (bytes) of mode data to be transferred.

Block Descriptor Length indicates the length (bytes) of the block descriptor to be transferred.

Table 4.35 shows the format of the Block Descriptor field.

Table 4.35 Block Descriptor

Bit	7	6	5	4		3	2	1	0
Byte	7	6	5	4		3	2	1	0
Byte
0				Density Code (00h)
1-3				Number of Blocks

4					Reserved
5-7				Block Length

C156-E224-01EN

4-23

Image 97

Fujitsu MCJ3230SS manual Mode parameters, Mode Parameter Header, Block Descriptor

Contents

MCJ3230SS Optical Disk Drive Product Manual Handling of This Manual For Safe Operation Revision History This page is intentionally left blank Overview of Manual Preface Glossary Conventions for Alert MessagesAcronyms and Abbreviations Preface Disclaimer Important Alert Items Low temperature burnsImportant Alert Messages Device damage Damage for disk medium Damage for data mediumEye inflammation Data loss This manual ISO/IEC *1 Scsi AnsiISO/IEC JTC1 *1 Fujitsu Limited Contents Installation Requirements 6.6 Host Interface Diagnosis and Maintenance Operation and Cleaning C156-E224-01EN Xiii Figures Illustrations Revision label Revision number indication Tables Power consumption in power save mode C156-E224-01EN Xvii This page is intentionally left blank General Description Performance Features Reliability Features Adaptability Maintainability/operability Interface General Description Drive model Drive Configuration Optical disk drive configuration Configuration Mechanical sections Control circuit section Control circuit section block diagram Drive Configuration This page is intentionally left blank Optical Disk Drive Specifications SpecificationsModel and product number Model and order number Specifications 1 Drive specifications Density Specifications 2 Environmental and power requirements 1 Environmental and power requirements Ietm Environmental and power requirements 2 MTBF= Error rate Recommended optical disk cartridge specifications Optical Disk Cartridge SpecificationsRecommended optical disk cartridge specifications Optical disk cartridge Optical disk cartridge Disk specifications Disk specifications Defect Management Defect management schematic diagram Example of alternate processing Temperature measurement point Installation RequirementsEnvironmental Requirements Surface temperature measurement points Temperature requirements at measurement points Temperature requirements and measuring methodAir flow Temperature at each measuring point Reference Temperature rise under several conditionsAir purity Mounting Requirements External dimensions Dimensions without panel Installation directions Installation direction Centers of gravity Centers of gravity Mounting frame structure Service clearance Current waveform +5 VDC Power Supply Requirements Cable Connections Drive connectors 11 Shape of setting terminal Pin assignments Recommended components for connection Cable connector specifications 12 Scsi bus connection modes Connection Modes 13 Scsi bus connection modes Default jumper settings SettingsSetting terminal Scsi ID setting CNH2 Write cache mode setting Scsi terminating resistor mode Spindle motor automatic stop mode setting General notes Installation Requirements 15 Packing style Mounting Mounting procedureChecks before mounting the drive Cable Connections Confirming initial operations Connection check Dismounting Drive This page is intentionally left blank Host Interface Interface Connector Scsi interface connector cable side MSG SEL Scsi interface connector pin assignments single-ended type Various Processes Reset responseDefective sector management Automatic alternate sector assignment function Data buffer Cache functionRead cache Power mode Power management functionMO write cache Pre-idle mode Active modeIdle mode Standby mode Power mode Power mode transition LED indications LED indications Scsi commands Scsi Commands Test Unit Ready command Test Unit Ready commandInquiry command Inquiry command response data Mode Select command Read Capacity commandRead Capacity command Mode Select command 11 Mode parameter list 10 Mode page codes12 Mode parameter header 15 Read/write error recovery 14 Mode13 Block descriptor Default values in the read-write error recovery 16 Variable values in the read-write error recovery 18 Flexible disk Variable values in the flexible disk 21 Caching 24 Power condition22 Variable values in the Caching 26 Default values in the Power condition 25 Variable values in the Power conditionVerify control Default values in the Verify control 28 Verify modeVariable values in the Verify control 31 Mode Sense command Mode Sense commandControl field 34 Mode Parameter Header 33 Mode parameters35 Block Descriptor 36 Mode START/STOP Unit command37 START/STOP Unit command 38 Start, stop, and eject processing 39 Reserve command Reserve command Request Sense command Release command40 Release command 41 Request Sense command 42 Request Sense Data 43 Error Code 45 Logical track address format 44 Sense Key 46 ASC and Ascq definitions 47 Format progress indication bytes 48 PREVENT/ALLOW Medium Removal command PREVENT/ALLOW Medium Removal command49 Responses to Prevent, Allow, and Eject Sense KEY Read 10 command Read 6 command50 CDB of Read 6 command 51 Read 10 command Write 6 command Verify command52 Verify command 53 CDB of Write 10 command 54 Write 10 command Write 10 command55 Write and Verify command Seek 10 command Seek 6 command56 Seek 6 command 57 Seek 10 command Synchronize Cache command Erase command58 Erase command 59 Synchronize Cache command 60 Format Unit command Format Unit command61 Format Unit parameter list 62 Defect List Header 63 Read Defect Data command Read Defect Data command64 Defect List Format of Read Defect Data 10 command 65 Defect list header of Read Defect Data 10 command Receive Diagnostic Results command Send Diagnostic command 70 Write Buffer command Write Buffer commandDiml Write Long command Read Long command71 Read Long command 72 Write Long command Message formats Scsi MessagesMessage types 73 Types of messages provided by ODD Message functions LUN 74 Transfer mode settings requested by Init to ODD Timing Rule 75 Timing specifications 1 75 Timing specifications 2 75 Timing specifications 3 BUS Free phase 76 Fast Scsi Timing specifications Arbitration phase Selection phase Transfer in asynchronous mode Transfer in Fast Scsi mode 10 Attention condition Operating Optical Disk Drive Operation and Cleaning Optical disk drive front view with panel Optical disk drive Operating Optical Disk Drive Inserting cartridge Inserting cartridge Removing cartridge Ejecting removing cartridge Head cleaner Cleaning Drive Optial disk cartridge Optical Disk Cartridge Operation Write protect tab Write protect tab How to stick an index label on the MO cartridge How to affix an index label on the MO cartridge See figure Operation and Cleaning Cleaning tool Cleaning Optical Disk CartridgeCleaning kit Packed items cleaning kit Cleaning procedure Cleaning procedure Cleaning procedure 10 Cleaning procedure Self-diagnostic function Diagnosis and MaintenanceDiagnosis Initial self-diagnosis Test program Diagnostic command Maintenance requirements Maintenance Information REV. no Revision number Glossary Error detection and correction Error correction codeRecording power Disk reference surface Status This page is intentionally left blank Acronyms and Abbreviations ODF ODDOEM PCA Index Index Fujitsu Internal Use Only Index Write and Verify command Fujitsu Limited This page is intentionally left blank MCJ3230SS Optical Disk READER’S Comment Form