Contents
Illustrations
Figures
Figure 1.1 | Outer view (with panel) | |
Figure 1.2 | Outer view (without panel) | |
Figure 1.3 | Optical disk drive configuration | |
Figure 1.4 | Control circuit section block diagram | |
Figure 2.1 | Optical disk cartridge | |
Figure 2.2 | Algorithms for alternate processing | |
Figure 2.3 | Example of alternate processing | |
Figure 3.1 | Surface temperature measurement points | |
Figure 3.2 | Dimensions | |
Figure 3.3 | Dimensions (without panel) | |
Figure 3.4 | Installation directions | |
Figure 3.5 | Centers of gravity | |
Figure 3.6 | Mounting frame structure | |
Figure 3.7 | Service clearance | |
Figure 3.8 | Current waveform (+5 VDC) | |
Figure 3.9 | Connector and terminal locations | |
Figure 3.10 | Location of setting terminal | |
Figure 3.11 | Shape of setting terminal | |
Figure 3.12 SCSI bus connection modes | ||
Figure 3.13 SCSI bus connecti on modes | ||
Figure 3.14 | Setting terminal (CNH2) | |
Figure 3.15 | Packing style | |
Figure 4.1 | SCSI interface connector (ODD side) | |
Figure 4.2 | SCSI interface connector (cable side) | |
Figure 4.3 | Power mode | |
Figure 4.4 | BUS FREE phase | |
Figure 4.5 | ARBITRATION phase | |
Figure 4.6 | SELECTION phase | |
Figure 4.7 | RESELECTION phase | |
Figure 4.8 | Transfer in asynchronous mode | |
Figure 4.9 | Transfer in FAST SCSI mode | |
Figure 4.10 | ATTENTION condition | |
Figure 5.1 | Optical disk drive front view (with panel) | |
Figure 5.2 | Inserting cartridge | |
Figure 5.3 | Removing cartridge | |
Figure 5.4 | Optial disk cartridge | |
Figure 5.5 | Write protect tab | |
Figure 5.6 | How to stick an index label on the MO cartridge | |
Figure 5.7 | Cleaning procedure (1) | |
Figure 5.8 | Cleaning procedure (2) | |
Figure 5.9 | Cleaning procedure (3) | |
Figure 5.10 | Cleaning procedure (4) |
xiv |