
Contents
Tables
Table 2.1 | Model and order number | |
Table 2.2 | Specifications (1 of 2) | |
Table 2.2 | Specifications (2 of 2) | |
Table 2.3 | Environmental and power requirements (1 of 2) | |
Table 2.3 | Environmental and power requirements (2 of 2) | |
Table 2.4 Power consumption in power save mode |
| |
| when the temperature inside the drive is 20°C or lower | |
Table 2.5 | Recommended optical disk cartridge specifications | |
Table 2.6 | Disk specifications | |
Table 3.1 | Temperature requirements at measurement points | |
Table 3.2 | Temperature at each measuring point (Reference) | |
Table 3.3 | Pin assignments | |
Table 3.4 | Recommended components for connection | |
Table 3.5 | SCSI ID setting (CNH2) | |
Table 3.6 | SCSI terminating resistor mode | |
Table 3.7 | Write cache mode setting | |
Table 3.8 | Spindle motor automatic stop mode setting | |
Table 4.1 | SCSI interface connector pin assignments | |
Table 4.2 | LED indications | |
Table 4.3 | SCSI commands | |
Table 4.4 | TEST UNIT READY command | |
Table 4.5 | INQUIRY command | |
Table 4.6 | INQUIRY command response data | |
Table 4.7 | READ CAPACITY command | |
Table 4.8 | READ CAPACITY data | |
Table 4.9 | MODE SELECT command | |
Table 4.10 | Mode page codes | |
Table 4.1 | Mode parameter list | |
Table 4.12 | Mode parameter header | |
Table 4.13 | Block descriptor | |
Table 4.14 | Mode page | |
Table 4.15 | Read/write error recovery page | |
Table 4.16 | Variable values in the | |
Table 4.17 | Default values in the | |
Table 4.18 | Flexible disk page | |
Table 4.19 | Variable values in the flexible disk page | |
Table 4.20 | Default values in the flexible disk page | |
Table 4.21 | Caching page | |
Table 4.22 | Variable values in the Caching Page | |
Table 4.23 | Default values in the Caching Page | |
Table 4.24 | Power condition page | |
Table 4.25 | Variable values in the Power condition page | |
Table 4.26 | Default values in the Power condition page | |
Table 4.27 | Verify control page | |
Table 4.28 | Verify mode | |
Table 4.29 | Variable values in the Verify control page | |
Table 4.30 | Default values in the Verify control page |
xvi |
|