Furuno FM-3000 manual Weather channels, Change the channel group, if necessary

2.1.3 U.S.A., Canadian and International channels

There are 57 U.S.A., 61 Canadian and 57 International chan- nels. These channel groups may be specified for the operat- ing area.

qPush [CH/WX] ( DW U/I/C ) to select a regular channel.

•If a weather channel appears, push [CH/WX] ( DW U/I/C ) again. w While pushing [HI/LO], push [CH/WX] ( DW U/I/C ) to

change the channel group, if necessary.

•U.S.A., International (INT) and Canadian channels can be se- lected in sequence.

eRotate [CHANNEL] to select a channel.

•“DUP” appears for duplex channels.

•“A” appears for simplex channels.

USA

2.Basic Operation

2.1.4 Weather channels

There are 10 weather channels. Used for monitoring weather channels from the NOAA (National Oceanographic and At- mospheric Administration) broadcasts.

The transceiver can detect a Weather alert tone on the se- lected weather channel while receiving that channel, during standby on a regular channel or while scanning. See “Weather alert” on p. 38.

qPush [CH/WX] once or twice to select a weather channel.

•“WEATHER” appears when a weather channel is selected.

•“WX ALT” appears when the Weather alert function is in use. (p. 38)

WEATHER

		Push once	When Weather alert is OFF.
U.S.A. channels		or twice
			WX ALT
Push	+
CAN	INT
			When Weather alert is ON.
	DUP

w Rotate [CHANNEL] to select a channel.

Canadian channels International channels

6