Furuno FM-3000 manual Connections and Maintenance, Antenna Connections, Fuse Replacement, Cleaning

8. Connections and Maintenance

8.1 Antenna

8.4 Connections

A key element in the performance of any communication sys- tem is an antenna. Ask your dealer about antennas and the best place to mount them.

8.2 Fuse Replacement

One fuse is installed in the supplied DC power cable. If a fuse blows or the transceiver stops functioning, track down the source of the problem, if possible, and replace the damaged fuse with a new, rated one.

q

w

t r

e

Fuse rating: 10 A

8.3 Cleaning

If the transceiver becomes dusty or dirty, wipe it clean with a soft, dry cloth.

AVOID the use of solvents such as benzene or al- cohol, as they may damage transceiver surfaces.

qDC POWER CONNECTOR

Connects the supplied DC power cable from this connector to an external 13.8 V DC power source.

wEXTERNAL MICROPHONE JACKS

Connects to optional FM-3010 CONTROLLABLE MIC.

RCAUTION

NEVER connect other microphones, this may cause damage to the transceiver.

41