Panel Description, Front and side keys | Furuno FM-3000 manual

13. FM-3010 CONTROLLABLE MIC

OPTION

13.1 Panel Description

The optional FM-3010 remotely controls the FM-3000 and provides an optional Intercom function.

13.1.1 Front and side keys

Top keys

	q
		u
	w	y
	w	t
		t
	e	r

qPTT SWITCH [PTT] (pgs. 7, 56)

Push and hold to transmit; release to receive.

wCHANNEL UP/DOWN KEYS [Y]/[Z]

➥Push either key to change the operating channel, Set mode settings, etc. (pgs. 7, 56)

➥Push either key to adjust audio level or noise squelch level after [VOL] or [SQL] is pushed, respectively. (pgs. 7, 56)

➥Push either key to adjust the brightness of the LCD and key backlight after [VOL] is pushed for 1 sec. (p. 57)

➥In Set mode, changes setting of the selected item. (pgs. 37, 61)

➥Checks tag channels or changes scanning direction dur- ing scan. (pgs. 12, 60)

eCHANNEL 16/CALL CHANNEL KEY [16] ( 9 )

➥Selects Channel 16 when pushed. (pgs. 5, 55)

➥Selects call channel when pushed for 1 sec. (pgs. 5, 55)

•“CALL” appears when call channel is selected.

➥Push for 3 sec. to enter call channel programming con- dition when call channel is selected. (pgs. 8, 58)

➥While pushing [H/L], enters channel comments pro- gramming condition. (pgs. 8, 62)

➥Enters Set mode when pushed while turning power ON. (pgs. 37, 61)

51

Image 60

Furuno FM-3000 manual Panel Description, Front and side keys, PTT Switch PTT pgs, Channel UP/DOWN Keys Y/Z

Contents

Marine VHF Radiotelephone Foreword FM-3000 Case of Emergency Do not open the equipment Do not disassemble or modify the equipmentAny repair work must be done by a licensed radio technician Only qualified personal should work in- side the equipment Standard SteerlingCompass Transceiver Table of Contents Setting Tag Channels Set Mode ProgrammingInstallation Panel Description System Conﬁgulation Vii Standard supply & Options Standard supplyOptions Controls Front PanelSQL control p HI/LO key LO/DX IC SCR key 16 9 keyDistress key CH/WX DW U/I/C key Function Display Microphone Basic Operation Channel SelectionChannel Channel 9 Call channel Push once When Weather alert is OFF A. channels Or twice Weather channelsChange the channel group, if necessary Rotate Channel to select a channel Push HI/LO to select the output power, if necessary Receiving and Transmitting Call Channel Programming Channel CommentsPush Set mode Scrambler code item Optional Voice Scrambler OperationActivating the Scrambler Programming scrambler codes Dualwatch/Tri-Watch DescriptionOperation Again Example Operating Tri-watch on INT Channel Scan Operation Scan Types Setting Tag Channels Convinient Clearing setting all tagged channelsStarting a Scan Scan starts DSC Operation Mmsi Code ProgrammingDSC Individual ID Programming Address ID/Group ID Deleting Address ID/Group ID Set the individual ID and ID nameRotate Channel to select the desired ID name for deleting Edit the digit of your latitude data by using Channel Edit the digit of your longitude data by using ChannelEdit the digit of the current UTC time by using CHAN- NEL Push DSC/ENT to set the time, and exit the DSC menu Position/Time Indication Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’ Distress alert contains default Distress CallSimple call Normal call Push Distress for 5 sec. to transmit the Distress call Transmitting DSC Calls Transmitting Individual callPush DSC/ENT to transmit the Individual call Transmitting Individual acknowledgement Indv ACK Transmitting Group call Push DSC/ENT to transmit the Group call Transmitting All Ships call Push DSC/ENT to transmit the All Ships call Transmitting Position Request call Push DSC/ENT to transmit the Position Request call Transmitting Position Report call Transmitting Position Reply call Transmitting Position Report Reply callPush DSC/ENT to transmit the Position Report call Receiving DSC Calls Receiving a Distress callReceiving a Distress acknowledgement Receiving an Individual call Receiving an All Ships call Receiving a Distress Relay callReceiving a Geographical Area call Receiving a Position Request call Receiving a Position Report callReceiving a Position Reply call Receiving a Position Report Reply call Received Messages Distress messageRotate Channel to select Distress, push DSC/ENT Rotate Channel to scroll the message Other messages Rotate Channel to select Other, push DSC/ENT DSC Set Mode Offset timeRotate Channel to select Offset time, push DSC/ENT Push DSC/ENT to program and to exit the DSC menu Mmsi code check Rotate Channel to select Mmsi Check, push DSC/ENTCheck the 9-digit Mmsi DSC self ID code Push DSC/ENT to exit the DSC menu Push LO/DX IC SCR for 1 sec. to enter Intercom mode Other FunctionsIntercom Operation FM-3000 caller Microphone Lock Function Display Backlighting Set Mode Set Mode ProgrammingAuto ACK items are not selectable when using FM-3010 Set Mode Items Scan modeScan resume timer Weather alert This item adjusts the contrast of the LCD in 8 steps DSC watchBeep tone Internal speaker Attenuation level Scrambler codeAutomatic acknowledgement Connections and Maintenance Fuse ReplacementCleaning Antenna Connections Antenna Connector Nmea in Red/NMEA OUT White JacksExternal Speaker Jack Using the supplied mounting bracket Mounting the Transceiver Using the optional FM-3040 Attach the clamps on either side of the FM-3000 Optional Unit Installation Dimensions 145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄253.0 ⁄32 Unit mm Troubleshooting Problem Possible Cause Solution † Low power only Channel List Operating Rules Radio license for boaters U.S.A. only Speciﬁcations SpeciﬁcationsGeneral Transmitter PTT Switch PTT pgs Panel DescriptionFront and side keys Channel UP/DOWN Keys Y/Z VOLUME/DIMMER KEY VOL DIM CHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/CLO/DX IC SCR SQUELCH/MONITOR/LOCK KEY SQL Moni L Top keys Volume Indicator p Squelch Indicator pScan Indicator pgs 1DUAL/TRI Watch Indicator pgs Call channel 13.3 3 Weather channelsChannel group A. channels Turn power on Set output Push H/L to select the output power, if necessaryPush Y/Z to select the desired channel Push Y/Z to adjust the backlight level Lock FunctionsActivating the Lock function Activating the All key lock function Monitor Function RF Attenuator FunctionPush LO/DX to turn the RF Attenuator function on and OFF Push CH/WX DW U/I/C several Dualwatch/Tri-watch Operation Programming scramble codesPush Y/Z to select the desired channel LO/DX IC SCR to turn To cancel the tag channel setting, push Scan TAG for 1 sec Convenient Clearing setting all tagged channelsTo stop the scan, push Scan TAG Entering Set mode Turn power OFF While pushing 16 9 , turn power onBeep tone Beep Intercom beep function Push SQL to move to forward then push Y/Z to seAvailable characters 13.17 FM-3010 supplied accessories Accessories included with the FM-3010 QtyConnection cable FM-3011 6 m 20 ft Installation Completed installation should look like this Mm 3⁄32˝ 165 mm 61⁄2 149 mm 57⁄8 R11 Mm 3⁄32