Mounting the Transceiver | Furuno FM-3000 specification

8.Connections and Maintenance

8.5 Mounting the Transceiver

8.5.1 Using the supplied mounting bracket

The universal mounting bracket supplied with your transceiver allows overhead or onboard mounting.

•Mount the transceiver securely with the 4 supplied screws (M5 ⋅ 20) to a surface which is more than 10 mm thick and

can support more than 5 kg.

•Mount the transceiver so that the face of the transceiver is at 90° to your line of sight when operating it.

RCAUTION

KEEP the transceiver and microphone at least 1 meter away from your vessel’s magnetic navigation compass.

Note: Check the installation angle; the function display may not be easy-to-read at some angles.

•OVERHEAD MOUNTING

These screws are shown as mounting example only. Not supplied with accsesories.

•MOUNTING ON THE BOARD

Page 52

Image 52

Furuno FM-3000 manual Mounting the Transceiver, Using the supplied mounting bracket

Contents

Marine VHF Radiotelephone Foreword FM-3000 Case of Emergency Do not disassemble or modify the equipment Do not open the equipmentAny repair work must be done by a licensed radio technician Only qualified personal should work in- side the equipment Standard SteerlingCompass Transceiver Table of Contents Setting Tag Channels Set Mode ProgrammingInstallation Panel Description System Conﬁgulation Vii Standard supply Standard supply & OptionsOptions Controls Front PanelSQL control p HI/LO key LO/DX IC SCR key 16 9 keyDistress key CH/WX DW U/I/C key Function Display Microphone Basic Operation Channel SelectionChannel Channel 9 Call channel Push once When Weather alert is OFF A. channels Or twice Weather channelsChange the channel group, if necessary Rotate Channel to select a channel Push HI/LO to select the output power, if necessary Receiving and Transmitting Channel Comments Call Channel ProgrammingPush Set mode Scrambler code item Optional Voice Scrambler OperationActivating the Scrambler Programming scrambler codes Dualwatch/Tri-Watch DescriptionOperation Again Example Operating Tri-watch on INT Channel Scan Operation Scan Types Setting Tag Channels Convinient Clearing setting all tagged channelsStarting a Scan Scan starts DSC Operation Mmsi Code ProgrammingDSC Individual ID Programming Address ID/Group ID Set the individual ID and ID name Deleting Address ID/Group IDRotate Channel to select the desired ID name for deleting Edit the digit of your latitude data by using Channel Edit the digit of your longitude data by using ChannelEdit the digit of the current UTC time by using CHAN- NEL Push DSC/ENT to set the time, and exit the DSC menu Position/Time Indication Sentence formatteres ‘GGA,’ ‘GNS,’ ‘GLL’ Distress Call Distress alert contains defaultSimple call Normal call Push Distress for 5 sec. to transmit the Distress call Transmitting Individual call Transmitting DSC CallsPush DSC/ENT to transmit the Individual call Transmitting Individual acknowledgement Indv ACK Transmitting Group call Push DSC/ENT to transmit the Group call Transmitting All Ships call Push DSC/ENT to transmit the All Ships call Transmitting Position Request call Push DSC/ENT to transmit the Position Request call Transmitting Position Report call Transmitting Position Report Reply call Transmitting Position Reply callPush DSC/ENT to transmit the Position Report call Receiving DSC Calls Receiving a Distress callReceiving a Distress acknowledgement Receiving an Individual call Receiving a Distress Relay call Receiving an All Ships callReceiving a Geographical Area call Receiving a Position Request call Receiving a Position Report callReceiving a Position Reply call Receiving a Position Report Reply call Received Messages Distress messageRotate Channel to select Distress, push DSC/ENT Rotate Channel to scroll the message Other messages Rotate Channel to select Other, push DSC/ENT DSC Set Mode Offset timeRotate Channel to select Offset time, push DSC/ENT Push DSC/ENT to program and to exit the DSC menu Mmsi code check Rotate Channel to select Mmsi Check, push DSC/ENTCheck the 9-digit Mmsi DSC self ID code Push DSC/ENT to exit the DSC menu Push LO/DX IC SCR for 1 sec. to enter Intercom mode Other FunctionsIntercom Operation FM-3000 caller Microphone Lock Function Display Backlighting Set Mode Programming Set ModeAuto ACK items are not selectable when using FM-3010 Set Mode Items Scan modeScan resume timer Weather alert This item adjusts the contrast of the LCD in 8 steps DSC watchBeep tone Internal speaker Scrambler code Attenuation levelAutomatic acknowledgement Connections and Maintenance Fuse ReplacementCleaning Antenna Connections Nmea in Red/NMEA OUT White Jacks Antenna ConnectorExternal Speaker Jack Using the supplied mounting bracket Mounting the Transceiver Using the optional FM-3040 Attach the clamps on either side of the FM-3000 Optional Unit Installation 145.0 5 23⁄32 103.0 110.0 4 11⁄32 165.0 6 1⁄2 Dimensions53.0 ⁄32 Unit mm Troubleshooting Problem Possible Cause Solution † Low power only Channel List Operating Rules Radio license for boaters U.S.A. only Speciﬁcations SpeciﬁcationsGeneral Transmitter PTT Switch PTT pgs Panel DescriptionFront and side keys Channel UP/DOWN Keys Y/Z VOLUME/DIMMER KEY VOL DIM CHANNEL/DUALWATCH/TRI-WATCH KEY CH/WX DW U/I/CLO/DX IC SCR SQUELCH/MONITOR/LOCK KEY SQL Moni L Top keys Volume Indicator p Squelch Indicator pScan Indicator pgs 1DUAL/TRI Watch Indicator pgs Call channel 13.3 3 Weather channelsChannel group A. channels Push H/L to select the output power, if necessary Turn power on Set outputPush Y/Z to select the desired channel Push Y/Z to adjust the backlight level Lock FunctionsActivating the Lock function Activating the All key lock function Monitor Function RF Attenuator FunctionPush LO/DX to turn the RF Attenuator function on and OFF Push CH/WX DW U/I/C several Dualwatch/Tri-watch Operation Programming scramble codesPush Y/Z to select the desired channel LO/DX IC SCR to turn Convenient Clearing setting all tagged channels To cancel the tag channel setting, push Scan TAG for 1 secTo stop the scan, push Scan TAG Turn power OFF While pushing 16 9 , turn power on Entering Set modeBeep tone Beep Push SQL to move to forward then push Y/Z to se Intercom beep functionAvailable characters Accessories included with the FM-3010 Qty 13.17 FM-3010 supplied accessoriesConnection cable FM-3011 6 m 20 ft Installation Completed installation should look like this Mm 3⁄32˝ 165 mm 61⁄2 149 mm 57⁄8 R11 Mm 3⁄32