Furuno FM-3000 manual DSC Operation, Mmsi Code Programming, DSC Individual ID

5. DSC Operation

5.1 MMSI Code Programming

The 9-digit MMSI (Maritime Mobile Service Identity: DSC self ID) code can be programmed at power ON.

Note: This function is not available when the MMSI code has been programmed by the dealer. This code programming can be performed only twice.

qTurn power OFF.

wWhile pushing [DSC/ENT], turn power ON to enter MMSI code programming condition.

eAfter the display appears, release [DSC/ENT].

Set MMSI

ä23456789

rEdit the specific MMSI code by rotating [CHANNEL].

•Push [CH/WX] or [SCAN] to move the cursor forward or back- ward, respectively.

tInput the 9 digit codes, then push [DSC/ENT] to set the code.

• Returns to the normal operation.

5.2 DSC Individual ID

A total of 40 DSC address IDs can be programmed and named with up to 10 characters.

DProgramming Address ID/Group ID

qPush [DSC/ENT] to enter the DSC menu.

wRotate [CHANNEL] to select “Set up,” push [DSC/ENT].

Sel Item POS Report DTRS Set

˘Set up

eRotate [CHANNEL] to select “Add ID,” push [DSC/ENT].

Set up ˘Add ID

Delete ID Offset Time

13