14
5.DSC Operation
rSet the individual ID and ID name.
•Edit the 9 digits of the appropriate distress ID by using [CHAN-
NEL].
-Push [CH/WX]or [SCAN]to move the cursor forward or back-
ward, respectively.
Note: 1st digit ‘0’is fixed for a group ID. Thus an address ID
input cannot started with ‘0.’When you input 1st digit ‘0’ and other
8 digits, the ID is automatically registered as a group ID.
tPush [DSC/ENT]to program and exit the condition to the
normal operation.
DDDeleting Address ID/Group ID
qPush [DSC/ENT]to enter the DSC menu.
wRotate [CHANNEL]to select “Set up,” push
[DSC/ENT].
eRotate [CHANNEL]to select “Delete ID,” push
[DSC/ENT].
•When no address ID is programmed, the transceiver exits the
DSC menu automatically.
rRotate [CHANNEL]to select the desired ID name for
deleting.
tThe delete confirmation display will appear when
[DSC/ENT]is pushed.
•Push [HI/LO]to delete ID and exit the DSC Menu.
•Push [DSC/ENT]to cancel deleting and exit the DSC Menu.
DeleteID
Ricky
˘Bill
Tom
Setup
AddID
˘DeleteID
OffsetTime
AddID
ID:4
NAME: