13.12 Starting a Scan

qWhile pushing [H/L], push [CH/WX] ( DW U/I/C ) several times to select the channel group (USA, INT, CAN), if de-

sired.

When the Weather alert function is in use, select the desired weather channel with [CH/WX] and [Y]/[Z].

wPush [SCAN] to start Priority or Normal scan.

“SCAN” appears during Normal scan.

The priority channel readout indicates “16”, and “P” and “SCAN” indicators appear during Priority scan.

When a signal is received, scan pauses until the signal disap- pears or resumes after pausing 5 sec. according to the Set mode setting (Channel 16 is still monitored during Priority scan).

Push [Y]/[Z] to check the scanning tag channels, to change the scanning direction or resume the scan manually.

eTo stop the scan, push [SCAN] ( TAG ).

“SCAN” disappears.

Pushing [PTT], [16] ( 9 ) or [CH/WX] also stops the scan.

13. FM-3010 CONTROLLABLE MIC

13.13 Setting Tag Channels

qWhile pushing [H/L], push [CH/WX] ( DW U/I/C ) several times to select the channel group (USA, INT, CAN), if de- sired.

wPush [Y]/[Z] to select the desired channel to set as a tag channel.

ePush [SCAN] ( TAG ) for 1 sec. to set the displayed channel as a tag channel.

• “” appears.

rTo cancel the tag channel setting, push [SCAN] ( TAG ) for 1 sec.

• “” disappears.

Convenient: Clearing (setting) all tagged channels

While pushing [H/L], push [SCAN] ( TAG ) for 3 sec. (until a long beep changes to 2 short beeps) to clear all tag channels setting in the channel group.

After cleared all tag channels, same way to set all tag channels.

60

Page 69
Image 69
Furuno FM-3000 manual To stop the scan, push Scan TAG, To cancel the tag channel setting, push Scan TAG for 1 sec