Furuno FM-3000 manual Transmitting Position Report call

5.6.6 Transmitting Position Report call

Transmit a Position Report call when you want to anounce your own position to a specific ship and to get answer, etc.

qPush [DSC/ENT] to enter the DSC menu.

wRotate [CHANNEL] to select “POS Report,” push [DSC/ENT].

Sel Item

All ships

POS Request

˘POS Report

eRotate [CHANNEL] to select the desired pre-programmed individual address or “Manual Input,” push [DSC/ENT].

•The ID code for the Position Report call can be set in advance. (p. 13)

•When “Manual Input” is selected, set the 9-digit ID code (1st digit must not be ‘0’) for the individual you wish to call by using [CHANNEL].

-Push [CH/WX] or [SCAN] for cursor movement.

-After 9-digit is input, push [DSC/ENT] to set the ID code.

Sel Address Manual Set Ricky

˘Tom

5.DSC Operation

Note: When a GPS receiver (NMEA0183 ver. 2.0 or 3.01) is connected, next steps r, t (Current position/time program- ming) do not appear. Go to step y. (next page)

rThe position information appears. Set the current posi- tion, push [DSC/ENT].

Input POS

° .

-° .

Null˘[H/L]

•Edit the digit of your position data by using [CHANNEL].

-Push [CH/WX] or [SCAN] for cursor movement.

-After editing latitude data, select “N”; North latitude or “S”; South latitude.

-After editing longitude data, select “E”; East longitude or “W”; West longitude.

-Push [HI/LO] to clear the position data.

tThe time information appears. Set the current UTC time, push [DSC/ENT].

Input time

UTC :

Null˘[H/L]

•Edit the digit of the current UTC time by using [CHANNEL].

-Push [CH/WX] or [SCAN] for cursor movement.

-Push [HI/LO] to clear the time data.

26